IE Stage2 ECU Tune Turbocharged Performance with TCU Patch For Audi 3.0T S4, S5, SQ5 B9 - IESOVZ12

TRANSFORM YOUR 3.0T

Your 2017-2020 Audi S4 or S5 is the home to a turbocharged 3.0L V6 powerhouse begging to be let loose. IE's performance calibrations unleash your car's full potential right out of the gate. Maximized for incredible power at home on the drag strip and road course while maintaining full comfort and reliability on your everyday commute. Experience IE's Performance ECU Software yourself with a simple install that takes only minutes from the comfort of your own driveway.

TCU TUNE OR PATCH REQUIRED

Once tuned, massive horsepower and torque gains are seen throughout the entire powerband that exceed the torque limitations of the stock transmission tune and limit power output. To solve this, a matching transmission TCU Patch (included) or TCU Tune (sold separately) is required.

IE's calibrators have written a free software patch for the factory transmission control unit (TCU) that raises the torque limits of the AL552 ZF8 automatic transmission to allow the power gains from IE Tunes. This patch fully realizes all available performance from the IE ECU Stages while keeping all transmission driving characteristics otherwise stock. This TCU patch is a simple installation using the POWERlink cable and is included with all B9 S4 & S5 ECU calibrations at no extra charge.

LEADING FEATURES

• Horsepower & torque gains maximized
• 91, 93, E40, & E85 octanes available (95, 98, RON E40, & E85)
• Full E85 for maximum top-end power
• E40 road course blend for higher mid range power
• Recalibrated factory boost gauge displays higher boost
• Neutral/park rev limit raised to 6500 RPM
• Annoying auto-start/stop defaults to off (button turns back on)
• More aggressive overrun/crackle in Dynamic mode (Stage 2)
• Crackles enabled for free revving in park or neutral
• Engine VE is completely remodeled for a smooth power curve
• Maximized throttle scaling for dependable throttle use
• Boost control reconfigured for smooth and crisp power delivery
• Optimized EGT for safe fuel ratios and maximized power output
• Eliminated/minimized turbocharger surge
• Reduced turbocharger lag
• Road speed limiters removed
• Engineered for all climates and elevations
• Direct port OBDII at-home flashing
• Easy octane switching takes only minutes
• Read and clear diagnostic/problem codes
• Easy to use Data-logger

ETHANOL FUELS

E85 & E40 blend ethanol fuels unlock the most performance potential from our ECU tunes for your Audi S4 or S5. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is much less expensive than race gas. E40 Track Blend and E85 Drag Race are included with all IE Stages.

FULL E85 DRAG RACE

IE calibrators spent many months developing and testing ethanol blends on the B9 3.0T engines in many climates and elevations. Results were consistent that full E85 runs very close to or beyond the limit of the factory direct injection (DI) fuel system in the mid-range but allows for more power up top. IE's E85 calibration keeps mid-range power in check to avoid lean conditions, misfires, and power loss then ramps it up top for amazingly fast and consistent track times in a drag racing scenario. E85 is also great for easy fill-ups at the pump for daily driving without mixing blends.

E40 TRACK BLEND

E40 Race Blend is an ethanol mix of E85 with regular pump 91/93 fuel creating a lower ethanol content fuel. E40 offers the optimal ethanol content for the factory DI fuel system in the mid-range of the power band. The lower content ethanol allows this file to create the maximum power output from 3000RPM-4000RPM, perfect for road course and track racing. E40 will also result in a faster feeling car in most street driving situations. An ethanol content sensor kit is highly recommended when running ethanol blends.

 EGT OPTIMIZATION

Exhaust Gas Temperature (EGT) is the measurement of fuel mixtures exiting the exhaust and is used to determine the health of the fuel/air mixture entering the engine. IE engineers have spent countless hours adjusting boost air/fuel ratio, ignition timing angle, camshaft phasing, intake air temps, and much more to develop the proper EGT adjustments for ultimate engine safety without sacrificing power on all octanes. Since Ethanol burns cooler than gasoline, the extra fuel left over in the cylinders acts as coolant further reducing combustion temperatures and allows for a leaner air to fuel ratio without dangerous EGT levels. All IE files contain safety measures and complete knock control to keep the engine producing its potential within verified and safety-first operation.

RELIABILITY TESTING

IE's fully proven software brings track-ready ECU programming to your turbocharged 3.0L V6 engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!  

BOOST CONTROL

The stock ECU boost control is delivered in a very “close enough” and erratic boost curve. This slow response is reflected in the factory torque curve and can be felt on long power pulls when utilizing the entire powerband. To smooth out this torque curve, IE calibrators re-tuned the boost control mapping to be much faster achieving precision boost request targeting that results in unmatched power delivery.

THROTTLE MAPPING

The new generation Audi MG1 ECU uses a complicated mass flow model to calculate boost control. Typical ECU tunes simply raise the wastegate pressure, however, since the maps that control wastegate position (boost) are not controlled by throttle input resulting in limited throttle predictability. To avoid delivering full-boost at half throttle input, IE engineers have taken the care to rescale the entire mass flow model mathematically over 30 maps which correct the entire range of throttle input. This delivers a linear and predictable throttle pedal which improves drivability in every situation on the street or track.

  

 

 

 

 

Electrical/Electronic parts are non-returnable.